DIY Notebook

Remember those stamps we made a few weeks back? Here’s how to use those to make an Anthro-esque notebook.



Materials Needed:

1 stamp & ink

1 blank notebook, cost depends on size of notebook

1 gift tag or craft paper

The Process:

1. Decide what kind of design you want for your notebook based on what stamps you have available. I went with a tribal print using a stamp I made out of simple triangles.

2. Carefully stamp the entire front of your notebook. No worries if you make some mistakes since you can flip over your notebook and start fresh on the other side. You’ll be the only one to know.

3. When you’re finished stamping the notebook, take the gift tag and cover the back of it with glue before placing it on your notebook. I used glitter paper to cut out a gift tag but you could use regular craft paper or even cardstock.

4. Let the glue dry and then enjoy your new notebook!


DIY Drawer Pulls

A funny thing happened last fall. I dragged my dresser out to my front porch to spray paint it around 11 pm, pulling the door closed behind me. Then I remembered that the door was locked from the inside and both roommates were out of the state for the weekend. Panic ensued but luckily a friend had a spare key to let me in. Fortunately waiting on her to arrive at my house gave me some time to paint the dresser and more importantly, the knobs.

Materials Needed:

Wooden Knobs (sold in bags at Michaels), $5-10 depending on how many you need

Spray Paint ($3 at Wal-Mart)

Screws for when you’re all finished ($2-4 at Lowe’s or Home Depot)

The Process:


1. Lay all of your knobs flat on a piece of cardboard or plastic to prevent paint from going everywhere.


2. Spray the knobs as well as you can with the spray paint. My knobs were too round to cover perfectly well the first round. This is where spray paint comes in handy since it dries to the touch in 15 minutes or so.

3. Let the knobs dry for a few minutes and then add a second coat as needed.


4. Allow the knobs to dry for several hours to ensure they’re completely dry. Add the knobs to your dresser and call it a day!


+You can use regular paint and brush if you’d like. That’s what I did the first time I did this project. I didn’t like the way mine turned out and it took much longer to actually get every knob painted. Spray paint may be  messier but it’ll save you some valuable time.

IMG_0063     IMG_1139

+ Another fun idea if you’re into the geometric look is to paint the knobs and cover half of each one with painters tape. Then paint the other side a funky color. Boom! Instant edginess for your dresser.

DIY: “I Pine For You, Valentine” Printable


|Image via southernatlas on Instagram|

I grew up in a place called “The Pines,” which earned it’s name from (you guessed it) having copious amounts of pine trees. When I bought this Conifer Stamp Set from Yellow Owl Workshop, I knew it’d come in handy for Valentine’s Day.

Below you’ll find a how to for creating your own valentines like the one shown above. Don’t worry if every card isn’t perfect- that’s the fun in creating homemade products.



Pine needles stamp

Gold ink pad

Notecards or cardstock


1. Print out the attached PDF. Once it’s printed, hold it up to a lightsource and trace the outline of your notecards, making sure the text is centered.

2. Trace around the notecard while it’s centered so that you’ll know where to tape your notecard for printing. Repeat this for both the top and the bottom.

3. Using that sheet of paper, tape your two notecards in the outline using washi tape or painter’s tape.

4. Put the paper into your printer’s paper tray in the correct way so that the printer will print onto your cards. Repeat this for the amount of cards you need. It’s tedious but goes by quickly.

5. Once all your cards are printed, dip your pine needles stamp into a gold ink pad and stamp directly onto your cards. I did several designs, which you can see below. If you don’t feel like buying the whole set, you can totally use this method to create your own stamp.


6. Pass out all your valentines and watch people fawn over them.


-If you’re not into figuring out the whole printing on cards thing, you can always print directly onto card stock and cut them to the desired size after printing. 

– I printed mine on white notecards but I also think printing on cream or gray would look dreamy. 

DIY Tote Bag


Congratulations! You’ve discovered the easiest DIY idea around the block. So my dog Oliver travels a lot and didn’t have an appropriate bag for all of his accessories. After much debating about buying him a vintage Dooney and Bourke bag to fit in with all his hipster friends, it was decided that a handmade tote would do just the trick.

Materials Needed:

1 canvas tote bag (sold in packs of 3 at Michael’s for $10)

2 bottles of fabric paint ($2 each)

1 piece of cardboard or paper

1-2 paintbrushes

The Process:

1. Iron or smooth out any wrinkles in your tote bag. I threw mine in the dryer for a few minutes. After it’s smoothed out, slide your cardboard or paper inside to prevent the paint from bleeding through.

2. Draw your design on the bag. As with most things I make, a simpler design is usually easier and can lead to less disappointments later. I decided to go with Oliver’s signature look and freehanded his face and added a red bow tie below. If you’re not too keen on sketching a design, a simple geometric shape would look awesome. You can always look up outlines for things as well using the ol’ world wide web.

3. Once you have the outline drawn, jump in and get started painting. I made mistakes but fortunately the design prevented anyone but me from noticing it. It took two coats, with 10-15 minutes to dry in between.

4. Let your bag lay flat overnight and dry. After mine dried, I noticed some areas that needed to be filled in and also decided to outline Oliver’s bowtie in black.

5. Let the touchups dry.

6. Fill the bag with your heart’s desires and enjoy!